Courses On Offer
Below is a list of courses and services we currently have on offer. To book please send us a message via our 'contact us' form

Setting out for construction (5 day course) CITB Assured
Gain two CITB-approved certificates in one week: Total Station for Construction and Levelling & Taping.
Delivered at our purpose-built, state-of-the-art training facility, this course offers far more than a typical classroom experience.
Our instructors are very experienced engineers who stay closely connected to live construction projects, so their knowledge is always up to date. You’ll learn the latest methods, the newest equipment and the standards contractors expect on site today. Everything you learn is current, relevant and ready to use the moment you’re back on site.
This isn’t a tick-box course. We want you to leave confident, capable and ready to perform from day one, and our support carries on long after you’ve finished.
You can come back with questions from site, and you’re welcome at our free weekend training sessions to keep sharpening your skills.
Train with real kit, real props and real engineers. Get it right first time, every time.

Drone use for construction intermediate (1 day) CITB Assured
Take your drone skills from flying to surveying. In one day you’ll go through a complete drone survey workflow, from understanding what the client needs to handing over accurate, usable deliverables, and earn a CITB-approved certificate.
Drones are now a standard tool on site for topographical surveys, stockpile volumes, progress records and more. The aim of this course is to make sure the data you capture can be trusted. Most of the day is practical, with time spent in the field and at the computer.
On the day you’ll:
- Work out what the client needs and the accuracy the job demands
- Plan the survey, including access, take-off and landing zones, and ground control point layout
- Prepare risk assessments and method statements, and know who needs to be notified
- Choose between manual and automated flight for the task
- Fly the mission and check your data before leaving site, so you don’t have to come back
- Process the imagery through photogrammetry software, check its quality and export the finished deliverables
Our trainers are working engineers who use drones on live projects, so you’ll learn how drone surveys are actually carried out in construction today, not just what the manual says.
Our commitment to you: we’ll support you through your first two drone surveys after the course. We can help you plan the job, review your control and flight plan, and check your processed data before it goes to the client. That way your first real surveys are done right and your confidence builds quickly.
After that, you’re always welcome to come back with questions, and to join our free weekend sessions to keep your skills sharp.

RMachine Control for site engineers (1 day) CITB Assured
Get to grips with the technology that’s changing how earthworks and groundworks are delivered. This one-day course covers how machine control works, how to prepare design data for the machine, and how to make sure what’s built matches the design, and you’ll come away with a CITB-approved certificate.
The course is built around our own machine control simulator, which we designed and built in-house. It pairs a real cab display unit with a simulated GPS feed and a multi-screen setup, so you can practise excavator and dozer workflows in a realistic environment: loading designs, working to surfaces and linework, setting tolerances and following the guidance on screen. There’s no risk to people, plant or the job.
On the day you’ll:
- Convert design data into formats the cab display accepts, and isolate the information the operator actually needs
- Build 3D surface models, create offsets and find and fix errors in linework
- Choose between robotic total station, base and rover, and network RTK for the job, and check that site control is accurate enough
- Set up grade lasers with 2D automatic control systems
- Configure the display: units, layers, active surfaces, “steer to” lines, avoidance zones, tolerances and alerts
- Check the bucket or blade tip against survey control, and use the machine to take as-built measurements
- Understand the capabilities, limitations, health and safety benefits and commercial case for machine control, including a basic cost vs savings analysis
Our trainers are site engineers who prepare models and support machine control on live projects, so you’ll learn how the system is used on a working job, not just how the software menus work.
Whether you’re an engineer preparing the data, a supervisor managing the job or an operator stepping up to GPS, you’ll leave knowing how to get the design into the machine correctly and how to keep the job on grade.

Computer aided design (CAD) for construction (2 days)
CITB Assured
This course is for anyone who wants to learn how to use CAD for setting out, whatever their background or experience. You might be starting out in construction, already working on site or simply want to add a valuable skill. Over two days you’ll learn to turn designers’ drawings into accurate setting out data, and you’ll come away with a CITB-assured certificate.
No previous CAD experience is needed. We start with the basics and build up step by step, so by the end you’ll be confidently doing the tasks engineers deal with every week, using real site drawings rather than abstract exercises.
You’ll learn how to:
- Set up and organise project files, and open and import DWG, DXF and CSV data
- Check units and scale, georeference drawings and line up PDFs, images and external references
- Create and edit lines, shapes, text, dimensions, layers and blocks
- Compare two drawing revisions to see what has changed, and merge models together
- Build setting out models and export points to field controllers or setting out schedules
- Calculate areas and volumes directly from the drawing
- Create your own drawing templates and produce clean, professional PDFs ready to issue
- Fix corrupt files and reduce file sizes
Our trainers are working engineers who use CAD on live projects every week. They’ll show you the shortcuts that save time and the checks that prevent costly mistakes on site.
The course runs at our training facility or as a live online class, so you can learn in whichever way suits you best.

Coming soon ...

